spdk_ocssd_chunk_notification_entry Struct Reference

Data Fields

uint64_t nc
 This is a 64-bit incrementing notification count, indicating a unique identifier for this notification. More...
 
uint64_t lba
 This field points to the chunk that has its state updated.
 
uint32_t nsid
 This field indicates the namespace id that the event is associated with.
 
struct {
   uint8_t   error_rate_low: 1
 If set to 1, then the error rate of the chunk has been changed to low.
 
   uint8_t   error_rate_medium: 1
 If set to 1, then the error rate of the chunk has been changed to medium.
 
   uint8_t   error_rate_high: 1
 If set to 1, then the error rate of the chunk has been changed to high.
 
   uint8_t   unrecoverable: 1
 If set to 1, then the error rate of the chunk has been changed to unrecoverable.
 
   uint8_t   refreshed: 1
 If set to 1, then the chunk has been refreshed by the device.
 
   uint8_t   rsvd: 3
 
   uint8_t   wit_exceeded: 1
 If set to 1 then the chunk's wear-level index is outside the average wear-level index threshold defined by the controller.
 
   uint8_t   rsvd2: 7
 
state
 Field that indicate the state of the block.
 
struct {
   uint8_t   lblk: 1
 If set to 1, the LBA covers the logical block.
 
   uint8_t   chunk: 1
 If set to 1, the LBA covers the respecting chunk.
 
   uint8_t   pu: 1
 If set to 1, the LBA covers the respecting parallel unit including all chunks.
 
   uint8_t   rsvd: 5
 
mask
 The address provided is covering either logical block, chunk, or parallel unit.
 
uint16_t nlb
 This field indicates the number of logical chunks to be written. More...
 

Field Documentation

◆ nc

uint64_t spdk_ocssd_chunk_notification_entry::nc

This is a 64-bit incrementing notification count, indicating a unique identifier for this notification.

The counter begins at 1h and is incremented for each unique event

◆ nlb

uint16_t spdk_ocssd_chunk_notification_entry::nlb

This field indicates the number of logical chunks to be written.

This is a 0's based value. This field is only valid if mask bit 0 is set. The number of blocks addressed shall not be outside the boundary of the specified chunk.


The documentation for this struct was generated from the following file: